Home > How To > Where To Put HDD And CDwriter On IDE Cable When SATA Is C

Where To Put HDD And CDwriter On IDE Cable When SATA Is C


Chucked it in the bin.3. It won't be that bad. Thank you! I've switched the jumpers, I've switched the drives, nothing will work. navigate here

I have a newer computer with both SATA and IDE and have both a SATA and IDE drives and controllers - most newer boards with SATA will have 4 SATA connections Not one problem with your directions!!!Any Idea if I can have a Windows 2000, Windows XP and Windows Vista 64 all in the same wireless network? I am currently running a Maxtor 200GB SATA drive as the master and a Maxtor 120GB IDE drive as the slave. Gosh, it's been awhile since I've thought about that stuff!! http://www.helpwithpcs.com/upgrading/installing_cd_recorder.htm

How To Connect Ide Dvd Drive To Sata Motherboard

Select the ammount of space you would like to use for this partition. It's not your job to go around examining articles and deciding whether or not they are suitable for people who don't understand the basics of what the article is about.Having said The hard drive that the system boots from is usually the primary master. The cable connectors are color-coded: blue for the host connector, black and gray for the primary and secondary disk drives.

I am trying to do this with the original Hard Drive removed and the CD-Rom drive selected as the on from which to boot up. I only have 2 SATA ports on my motherboard. Follow the instructions in Answer ID 3865: How to partition and format a WD drive on Windows and macOS for Windows XP. Dvd Drive Power Cable Another jumper setting, which you can use if you have an 80-conductor ribbon cable, is Cable Select. 80-conductor cables can be identified by their much finer wires compared to 40-conductor cables

Reply Geoffrey on January 5, 2009 at 10:25 am This guide helps even those who are good at computers. How To Connect Ide Hard Drive To Sata Motherboard i want to format it… thanx Reply Tim on January 1, 2009 at 2:16 pm All the Bickering that I read in the begging of this is absolutly POINTLESS!!!! If you have a motherboard like this, you can use the extra plug on the IDE ribbon cable to add one IDE hard disk to the system. emails appreciated Reply CHaz from Moscow on November 1, 2007 at 7:54 pm I have been trying to install a drive and my computer says CHange from stand alone to master.

Then i remembered that one is set to slave the other to master what do i set the third one to i tried slave but still screeched at me! Ide Hard Drive Jumper Settings I do have a suggestion though, could you add a few pics here and there so that we can see what you are talking about. Shipping to a APO/FPO/DPO? It's that way for a reason.

How To Connect Ide Hard Drive To Sata Motherboard

In conclusion, I'd suggest: IDE1 : hdd master, dvd-rw slave IDE 2: hdd master , dvd rw slave for 2hdd , 2dvd-rw IDE1 : hdd master, hdd slave IDE 2: hdd this page Left-click on Next to continue. How To Connect Ide Dvd Drive To Sata Motherboard Western Digital highly recommends partitioning your drive in this manner. How To Connect Dvd Drive To Motherboard Sata As you can see, the one on the left, the newer 80-wire cable has very small wires running from connector to connector, conversely, the 40-wire cable has larger wires.

Jumpers are used to configure certain devices including optical drives. far from a computer expert I was able to use your information to find the missing step I needed to install my sata 2nd drive. i have windows xp so it is not showing up on my computer. The IDE ribbon comes off of optical drive. How To Install Dvd Drive On Pc

Should i just go ahead with formatting it as a removable drive? by tubaloth / June 1, 2006 3:55 AM PDT In reply to: Mixing SATA and IDE drives in a system? Click Finish when complete. his comment is here I've burned DVD-R at full speed, verified 100%, with Toast, iTunes and Disk Utility.

Sorry, there was a problem. Why Is It Necessary To Partition The Hard Disk While Installing Operating System? I formatted it into a Dynamic Volume (I use Legal Win XP sp3). More resources Tom's Hardware Around the World Tom's Hardware Around the World Denmark Norway Finland Russia France Turkey Germany UK Italy USA Subscribe to Tom's Hardware Search the site Ok About

Support most hard drives, tested 2TB capacity SATA hard drive, under DOS, Windows XP, Vista, Server 2003 and more...NO SOFTWARE DRIVER REQUIRE, BIOS Detected!

Jumper setting for connect both hard disk and dvd drive on single ide cable Can dvd burner be on a split sata power cable with hard drive Hard Drive vs DVD Reply Steve on November 13, 2007 at 10:15 am Hi my problem is that my new replacement HD (my old one had a catastrophic failure) does not seem to be recognised The cable connectors are color-coded: blue for the host connector, black and gray for the primary and secondary disk drives. Sata And Ide Hard Drives Together thanks.

Reply Alan Bush on November 26, 2008 at 11:12 pm At last!! If you are not replacing a drive then you will need to remove the blank from the computer case at the front of the drive bay where you want the drive. Thanks a bunch David, I was really in a pickle. I can boot off of the SATA drive regardless, but the OS (WinXP Pro) will not see the IDE drive.

Should you decide to purchase any compatibility hardware, be sure to read product descriptions and user reviews before buying. - - - - - - - - - - - - Reply Ron. Input the capacity of the partition and click on the Apply button. How would they know whether they have an IDE or SATA hard drive if they have never even heard of those abbreviations before?

TRENDING: HP Pavilion DV6000 Notebook Review Uniblue Registry Booster Review Big Problems with Wireless in HP Pavilion NotebooksAbout PCMechMeet The TeamSupport PCMechPCMech NetworkJoin Our [emailprotected] TeamContact UsNewsletterAdvertisingWrite for PCMechAsk PCMech ForumsDo Along one side of the cable is a stripe. If you want multiple partitions on this hard drive see the additional instructions below: Adding Multiple Partitions to your Boot Drive durring a Windows 7 Installation: Important: Western Digital Technical Support note: Disconnect the power and remove your PC's cover, see our guide.

Power On Your Computer Replace the system cover, reconnect the power cord, and power on the system. After you have removed the cables from the device unscrew the fixing screws and put them to one side. Follow the onscreen prompts until the screen Where do you want to install Windows? Reply Michelle on March 6, 2009 at 7:59 pm Help!

Williams5.0 out of 5 starsQuick and Easy UpdateWorked excellent, I installed three of the units. Because of the slower drives controller, the PC will accommodate both drives by slowing down the pair to the older drives speed. My next Challange!!!Cheers Tim Reply Donny on January 3, 2009 at 4:19 pm Fantastic article!! How about installing a new and different hard drive in a laptop?

On the next screen, select the drive you are upgrading/installing. Adding an additional hard drive to a Windows XP installation: Make sure your hard drive is detected by your Serial ATA or EIDE controller. Can I replace the 6g with the 40 safely.